Revo Stage 2

All Revo performance Software is designed to safely enhance the driveability of your vehicle, giving access to more power and torque throughout the rev-range while maintaining the extensive factory safety mechanisms. Although Revo offer some of the most substantial performance increases on the market, peak figures form part of a much bigger picture and are never the sole focus during development. Revo Software offers a perfect balance of performance, economy, longevity and safety. Development and testing of Revo performance software is done in a number of territories around the world, taking into account variations in atmospheric conditions such as altitude and temperature. The Revo R&D process is the most extensive and in-depth in the industry, giving you a product you can trust and an experience you wont forget. Stage 2 Performance Software has been specifically developed to attain the best possible performance from the RS with a bolt on performance exhaust and quality cold air intake. Stage 2 allows you to run a sports cat or de-cat without the CEL (Check Engine Light) being triggered by a ‘CAT Efficiency’ error code. Stage 2 software is boost, fuelling and timing adjustable with slightly more flexibility than Stage 1 allowing the vehicle to be setup to suit the fuel quality, driving conditions and driver preferences. 2.5T RS Stage 2 software is specifically tuned to suit a specific hardware list.

• Up to 65 bhp and 90 lbft over a stock vehicle  
• SPS Settings (Software Switching) Setting
• #1 on your SPS sets your vehicle to stock Setting
• #2 on your SPS sets your vehicle to Revo Performance mode A (Boost, Fuelling and Timing settings can be configured by your Revo dealer to suit your requirements) Setting
• #3 on your SPS sets your vehicle to Revo Performance mode B (Boost, Fuelling and Timing settings can be configured by your Revo dealer to suit your requirements) Setting
• #4 on your SPS sets your vehicle to Revo Performance mode C (Boost, Fuelling and Timing settings can be configured by your Revo dealer to suit your requirements) Setting
• #5 on your SPS turns ON Anti-Theft mode Setting #6 on your SPS turns OFF Anti-Theft mode  
• *Valet mode can be set as a performance mode. C
• an be set using Boost setting 0. Vehicle will run and drive with no boost and a low rev limit of 3500rpm.  **NOTE: Stock mode is not completely stock, it will run similar performance levels to a stock vehicle. Your Revo dealer has a complete factory stock file, if any main dealer warranty or servicing work is required, we recommend returning your vehicle to complete stock.